Discontinuous machines of UT series from MTDI company

Universal test machines from MTDI Inc. South Korea 

UT-005 - mechanical tests with a load of up to 500 kgf.

UT-020 - mechanical tests with a load of up to 3 tons.

UT-100 - mechanical tests with a load of up to 10 tons.

UT-300 - mechanical tests with a load of up to 30 tons.

Features and Benefits:

Universal installations of the UT series provide precise control of speed and load with the help of a servo.

The main parts of the installation are: main frame, strong wedge grips, specialized controller US-110, software US-210, computer. In addition, this system can be used for testing at temperatures from -170 to 1100 ° C. Such tests are carried out in an oven or cryogenic chamber.

Specifications:

Main frame of the test machine:

This system can be used for tensile, compression, bending, creep, pure deformation, shear and conforms to international ASTM and ISO standards.

Main frame for the test machine:

(1) Crosshead at 280 kN / mm provides excellent stiffness (10 tons)

(2) Powerful servo drives and precision ball screw

(3) Crosshead working stroke: up to 1450 mm

(4) Speed ​​range: 0.0005 - 1000 mm / min.

(5) Speed ​​accuracy: 0.5 μm

(6) Speed ​​resolution: 0.03 μm

(7) Handheld remote control

Controller for testing machine:

Two types of controllers are used to control the UT series: UP-200 and UP-100. On the UT-F series, the UP-200 controller must be installed. UP-100 - controller for the UT-E series. The UP-200 controller allows the user to perform various types of tests, with a high data acquisition rate. The UP-100 controller can be used for both training and quality control.

Controller for testing machine:

(1) Sequential input function

(2) SCSI or LAN communication function

(3) Automatic sensor calibration

(4) Various Constraint Functions

(5) Temperature control in the furnace, chamber

(6) Resolution 24 bits

(7) High speed of data acquisition

(8) Remote control

(9) Wireless control and monitoring (patent)

US-210 software for testing machine:

Functions:

Test selection function

- stretching, compression, bending, shear, creep, reproducibility

The function of automatic data analysis is UTS, YS, ε (voltage), E, ​​etc.

Offset control

Load test control

Voltage Control

Cycle Management

Controlling the true deformation by means of a crosshead

Continuous load control (creep)

Voltage relaxation control

Enter, preview and save a test schedule

Display multiple charts

Setting and Confirming Constraints

Retrieving and saving data

Filtering data

Output of the final report

Warnings about the operation of the limit switch

Wireless control and monitoring (patent)

Chamber and oven UC-170 and UC-350:

This system is a climate chamber for testing at low and high temperatures.

The range of temperatures during testing is -170 to 350 ° C.

The camera is equipped with a cooling unit on liquid nitrogen and a cartridge-type heating unit.

The controller provides an even temperature distribution with the help of a fan, which is mounted inside the chamber.

The components of the camera are: a housing, a temperature controller and a support frame.

The chamber, the cryogenic chamber:

Temperature range: -170 to 350 ° C (Minimum temperature: -170 ° C);

Accuracy: ± 2 ° C (in the center of the camera);

Thermocouple: type K;

Material of the inner part of the chamber: stainless steel 304;

System of forced air circulation;

Hole for installing a temperature sensor;

U-block for easy installation;

Viewing window;

Low-temperature solenoid valve for supplying liquid nitrogen;

Cartridge heater;

Load cell protective cover;

Power supply: 220 V, 60 Hz, one phase.

UC-980 oven for testing machine:

This system is a high-temperature furnace for testing at high temperature.

The controller ensures a uniform temperature distribution with an accuracy of ± 2 ° C.

The constituent parts of the furnace are: a housing, a temperature controller and a supporting frame.

This system is suitable for working with a high-temperature extensometer.

High temperature furnace

High-temperature tests

Temperature: from 500 to 1050 ° C, max. 1100 ° C

Thermocouple: type K, sample mounting system

Heating: KANTHAL-A1

Power of one module: about 400 W

Isolation: Vacuum-cast ceramics with a low coefficient of K

Thermal protection and insulation: top and bottom

Heater supply: ~ 220 V, one phase

Heater power: no more than 4,5 kW

Switching on / off the heater, power switch

Controller - 3 pieces, indicator - 1 pc., Total - 4 pcs.

Simultaneous control of heating and cooling

Support for data exchange with a PC: RS 485

Heater breakdown alarm function

Control method: ON / OFF, F / PI / TD / PID