To view the table, scroll horizontally.
In metallography precision saws are commonly used for cutting samples of small forms, highly sensitive, fragile, very hard, where the cut needs to be made very close to the region of interest or the cut width and material loss must be minimal.
Precision cutting discs:
This high-tech family of drives was designed specifically to provide precise and accurate cutting of metallographic specimens. Disk diameter: from 60 to 200 mm. the thickness of the disc: from 0.15 to 0.9 mm. Discs are used for cutting glass, ceramics, polymers, rubber, hard and brittle samples. When finish cutting, the influence on the microstructure of the material is minimized with the correct choice of consumables and compliance with the parameters of the cut poluciaetsea flat cut with no debris, pitting, stratification. After such cutting procedure of grinding and polishing takes much less time, and saves consumables.
Description not available
Description not available
Description not available
Description not available
Description not available